When WatchOtaku, Paul Hubbard read my review of the Armida A6, he asked if I might like to try his Armida A8.
Needless to say, I was all over it. I was already impressed with the
quality of my A6, and the big, brass, A8 diver was high on my list of
watches I wanted to review. When it arrived, I quickly popped it onto
the supplied rubber strap and wore it around the house for the
afternoon. My wife noticed right away. "That's a nice watch" she said.
"Is it new?"
You might think this is a common
question in the Bum household, but you would be wrong. Watches pass
through my possession all the time and Mrs. Time Bum finds few of them
worthy of note. To the contrary, she most often tells me the new arrival
I am so excited about looks a lot like something else I own. I will
then sputter something about the tiny distinctions in case design or
dial layout. "The same?" I cry, "But that one has round markers, and this one has square
markers!" When I am done geeking out, I must admit that most of them
really do look quite similar – particularly the dive watches: round
stainless case, black dial and bezel, white markers... Yeah, Mrs. Time
Bum is right.

Enter, the A8. This watch earned her
attention with a combination of distinctive features, most notably, the
brass case. Bronze is an alloy comprised of copper and other metals.
Brass is a copper alloy containing more than 11 percent zinc. It ages
very much like other bronze alloys do, but it tends to be yellower and
less expensive. After several months of use, the brushed case and bezel
on Paul's A8 had developed an even, unforced patina. The bright gold of
new metal mellowing with oxidation. The result is warm, inviting, and quite unlike any other any other case material.
The A8 series was initially
available in black or green dials, with C3 or vintage orange lume, and
with or without a date window. All were shipped with two bezels: one
engraved brass, the other with an aluminum bezel insert that matched the
dial. Paul's is a black, date, vintage lume model that arrived with the
brass bezel installed. The bezels can swapped at home by simply prying
off the one and pressing the other into place, but considering that this
was someone's personal timepiece, I decided to leave well enough alone.
The black bezel looks great, but I prefer the engraved version.

The dial is glossy black with gold
text and indicies. The sword hands are brass and filled with "vintage"
color lume, as are the markers, and the lollypop second hand. I was
skeptical of the vintage lume, as many watchmaker's attempts turn out to
be a bright pumpkin orange, which may be a cool color in and of itself,
but not a particularly subtle one, and nothing like aged lume. The
orange lume on the A8 was rather sedate, and worked well with the brass
case, the gold and orange tones creating the desired "lived in" look.
Night time glow was not as potent as a green-white C3, but as you can
see from the photo below, still quite bright (A8 on top, C3 lumed Helson
Spear Diver and Shark Diver below). My biggest issue was not with the
color of the lume, but that of the date wheel. The black-on-white would
have worked fine with C3, but near the pale orange, it just seemed out
of place.

With a 42mm case the A8 is slightly
smaller than many Panerai-inspired bronzos, but it is still a large
diver. It is just over 13mm thick, 52mm lug-to-lug, and has an aggressively toothed
and slightly oversized 43mm bezel. Fat, drilled lugs are positioned
near the outer limit of the round case. The 8mm crown is signed and
recessed into a brawny guard. The case has flat sides and there is very
little curvature to the underside of the lugs, so the watch does not
wrap around your wrist, it sits on it. These are all design choices that
maximize the surface area of the watch and emphasize its overall
dimensions. Suffice to say, it is not lacking in presence. The A8
strikes a nice balance for those of us with smaller wrists. It looks
oversize, but it does not overwhelm.

The burly looks are not just a show.
The A8 was built to be a legitimate tool watch and it has the tech
specs to back it up, including a 120-click unidirectional bezel, 2.5mm
sapphire crystal with anti-reflective coating, screw down crown, and
300m water resistance rating. Strap options are strictly utilitarian.
The watch ships with two 22mm straps: a black Zulu in heavy weave nylon
with brass hardware, and rubber Isofrane style (possibly a Cuda?) with a
signed, brass Pre-V buckle. Of the two, I preferred the soft black
rubber. It was comfortable on the wrist and its thickness balanced the
watch's bulk better than the thinner nylon. The only downside was that
the buckle's huge frame happened to jut outwards just enough to catch on
everything it encountered. Of course, if the watch were mine, I would
lose them both and wear it on leather. Something cut from a vintage ammo
bag would do nicely.
The case back is stainless steel and
decorated with what I have previously described as the Armida
Buckyball. The crown is also stainless steel, a decision that may seem
odd on a brass case, but which is driven by necessity as the very
oxidization that makes the material so appealing also makes it susceptible to fusing.
Inside the case, a Seiko NH35a
automatic makes it all work. This is an update on the old faithful
7s36. Comparing the Seiko to the popular Miyota 9015, you will notice
they are both 24 jewel units with hacking and hand winding capabilities,
and a 40 hour power reserve. The Miyota runs at 28.8k bpm versus the
Seiko's 21.6k; however, the Seiko is less expensive, and unlike the
Miyota, it betrays no rotor noise. I have sampled both movements in
several watches, and while I appreciate the smooth sweep of the Miyota, I
do have to wonder why more micro brands are not opting for the cheaper,
quieter Seiko.

As of this writing, the vintage lume
versions of the A8 have sold out, as have those with the date window,
leaving only the black and green no-date watches. I think the dial looks
cleaner without the date, and while I liked the vintage/black
combination, I would choose the C3/green for myself.
Armida has packed quite a bit of
watchy goodness into the A8: sapphire, high water resistance, two
straps, two bezels, bright lume, and a look that stands out among the
crowded field of divers. Even better, they have brought us this little
brute for the Bum friendly price of $349, including international
shipping. Armida buyers looking for a different shape can try the $369
brass cushion case model, which also adds a ceramic bezel insert. If you
really want CuSn8 bronze and a Miyota 9015 instead of the brass and a
Seiko NH35a, they will be happy to sell you a model A1 for $999. I am
pleased that they offer both options, but for my money, I'll happily
take an A7 or A8 and keep the extra $630+ in my pocket.
Pro: Distinctive looks, two bezels, and a fantastic price.
Con: Awkward buckle position on my wrist. White date is not a good match with the orange lume, but this is no longer relevant.
Sum: Another winner from Armida. The Time Bum approves.

没有评论:
发表评论